설명
성형에 필요한 윤활제 등이 포함되어 있기 때문에 바로 성형을 할 수 있습니다.
사양
Inspection Characteristic | Unit | Lower Limiting Value | Upper Limiting Value | Desired Value | Indicative Value | Method |
Physical Physical analysis : |
||||||
Apparent density ISO 3923/1 - 2,5 mm | g/cm3 | 2,80 | 3,05 | IN.V.1010 | ||
Flowability ISO 4490 - 2,5 mm | s | 45,0 | IN.V.1004 | |||
Chemical Chemical analysis : |
||||||
Tin (Sn) | % | 9,00000 | 11,00000 | IN.V.1138 | ||
Carbon (C) | % | 0,15000 | 0,25000 | |||
Frittage Sintering : |
||||||
Green density | N/mm2 | 6,00 | IN.V.1020 | |||
Green strength | N/mm2 | 4,00 | IN.V.1022 | |||
Sintering atmosphere 50% H2/50% N2 | IN.V.1150 | |||||
Dewaxing at 700℃ | min | 10,00 | IN.V.1150 | |||
Sintering at 810℃ | min | 30,00 | IN.V.1150 | |||
Dimensional change | % | 0,00 | 0,50 | IN.V.1149 | ||
Dimensional change of standard | % | IN.V.1149 | ||||
Radial crushing strength | N/mm2 | IN.V.1022 | ||||
Radial crushing strength of standard | N/mm2 | IN.V.1022 |